This chapter documents the GNUnet file-sharing application. The original file-sharing implementation for GNUnet was designed to provide anonymous file-sharing. However, over time, we have also added support for non-anonymous file-sharing (which can provide better performance). Anonymous and non-anonymous file-sharing are quite integrated in GNUnet and, except for routing, share most of the concepts and implementation. There are three primary file-sharing operations: publishing, searching and downloading. For each of these operations, the user specifies an anonymity level. If both the publisher and the searcher/downloader specify “no anonymity”, non-anonymous file-sharing is used. If either user specifies some desired degree of anonymity, anonymous file-sharing will be used.
After a short introduction, we will first look at the various concepts in GNUnet’s file-sharing implementation. Then, we will discuss specifics as to how they impact users that publish, search or download files.
gnunet-search can be used to search for content on
GNUnet. The format is:
$ gnunet-search [-t TIMEOUT] KEYWORD
-t option specifies that the query should timeout after
TIMEOUT seconds. A value of zero (“0”) is interpreted
as no timeout, which is the default. In this case, gnunet-search will
never terminate (unless you press CTRL-C).
If multiple words are passed as keywords, they will all be considered optional. Prefix keywords with a “+” to make them mandatory.
Note that searching using:
$ gnunet-search Das Kapital
is not the same as searching for
$ gnunet-search "Das Kapital"
as the first will match files shared under the keywords “Das” or “Kapital” whereas the second will match files shared under the keyword “Das Kapital”.
Search results are printed like this:
#15: gnunet-download -o "COPYING" gnunet://fs/chk/PGK8M...3EK130.75446
The whole line is the command you would have to enter to download the
file. The first argument passed to
-o is the suggested filename (you
may change it to whatever you like). It is followed by the key for
decrypting the file, the query for searching the file, a checksum (in
hexadecimal) finally the size of the file in bytes.
In order to download a file, you need the whole line returned by
gnunet-search. You can then use the tool
gnunet-download to obtain
$ gnunet-download -o <FILENAME> <GNUNET-URL>
FILENAME specifies the name of the file where GNUnet is supposed to
write the result. Existing files are overwritten. If the existing file
contains blocks that are identical to the desired download, those blocks
will not be downloaded again (automatic resume).
If you want to download the GPL from the previous example, you do the following:
$ gnunet-download -o "COPYING" gnunet://fs/chk/PGK8M...3EK130.75446
If you ever have to abort a download, you can continue it at any time by re-issuing gnunet-download with the same filename. In that case, GNUnet will not download blocks again that are already present.
GNUnet’s file-encoding mechanism will ensure file integrity, even if the existing file was not downloaded from GNUnet in the first place.
You may want to use the
-V switch to turn on verbose reporting. In
this case, gnunet-download will print the current number of bytes
downloaded whenever new data was received.
gnunet-publish can be used to add content to the
network. The basic format of the command is:
$ gnunet-publish [-n] [-k KEYWORDS]* [-m TYPE:VALUE] FILENAME
$ gnunet-publish -m "description:GNU License" -k gpl -k test -m "mimetype:text/plain" COPYING
-k is used to specify keywords for the file that should
be inserted. You can supply any number of keywords, and each of the
keywords will be sufficient to locate and retrieve the file. Please note
that you must use the
-k option more than once – one for each
expression you use as a keyword for the filename.
-m option is used to specify meta-data, such as descriptions.
You can use
-m multiple times. The
TYPE passed must be from the
list of meta-data types known to libextractor. You can obtain this list
extract -L. Use quotes around the entire meta-data
argument if the value contains spaces. The meta-data is displayed to
other users when they select which files to download. The meta-data and
the keywords are optional and may be inferred using GNU libextractor.
gnunet-publish has a few additional options to handle namespaces and
directories. Refer to the man-page for details.
Indexing vs Inserting#
By default, GNUnet indexes a file instead of making a full copy. This is
much more efficient, but requires the file to stay unaltered at the
location where it was when it was indexed. If you intend to move, delete
or alter a file, consider using the option
-n which will force
GNUnet to make a copy of the file in the database.
Since it is much less efficient, this is strongly discouraged for large files. When GNUnet indexes a file (default), GNUnet does not create an additional encrypted copy of the file but just computes a summary (or index) of the file. That summary is approximately two percent of the size of the original file and is stored in GNUnet’s database. Whenever a request for a part of an indexed file reaches GNUnet, this part is encrypted on-demand and send out. This way, there is no need for an additional encrypted copy of the file to stay anywhere on the drive. This is different from other systems, such as Freenet, where each file that is put online must be in Freenet’s database in encrypted format, doubling the space requirements if the user wants to preserve a directly accessible copy in plaintext.
Thus indexing should be used for all files where the user will keep using this file (at the location given to gnunet-publish) and does not want to retrieve it back from GNUnet each time. If you want to remove a file that you have indexed from the local peer, use the tool gnunet-unindex to un-index the file.
-n may be used if the user fears that the file might be
found on their drive (assuming the computer comes under the control of
an adversary). When used with the
-n flag, the user has a much
better chance of denying knowledge of the existence of the file, even if
it is still (encrypted) on the drive and the adversary is able to crack
the encryption (e.g. by guessing the keyword).
For better results with filesharing it is useful to understand the following concepts. In addition to anonymous routing GNUnet attempts to give users a better experience in searching for content. GNUnet uses cryptography to safely break content into smaller pieces that can be obtained from different sources without allowing participants to corrupt files. GNUnet makes it difficult for an adversary to send back bogus search results. GNUnet enables content providers to group related content and to establish a reputation. Furthermore, GNUnet allows updates to certain content to be made available. This section is supposed to introduce users to the concepts that are used to achieve these goals.
A file in GNUnet is just a sequence of bytes. Any file-format is allowed and the maximum file size is theoretically \(2^64 - 1\) bytes, except that it would take an impractical amount of time to share such a file. GNUnet itself never interprets the contents of shared files, except when using GNU libextractor to obtain keywords.
Keywords are the most simple mechanism to find files on GNUnet. Keywords are case-sensitive and the search string must always match exactly the keyword used by the person providing the file. Keywords are never transmitted in plaintext. The only way for an adversary to determine the keyword that you used to search is to guess it (which then allows the adversary to produce the same search request). Since providing keywords by hand for each shared file is tedious, GNUnet uses GNU libextractor to help automate this process. Starting a keyword search on a slow machine can take a little while since the keyword search involves computing a fresh RSA key to formulate the request.
A directory in GNUnet is a list of file identifiers with meta data. The file identifiers provide sufficient information about the files to allow downloading the contents. Once a directory has been created, it cannot be changed since it is treated just like an ordinary file by the network. Small files (of a few kilobytes) can be inlined in the directory, so that a separate download becomes unnecessary.
Directories are shared just like ordinary files. If you download a
gnunet-download, you can use
list its contents. The canonical extension for GNUnet directories when
stored as files in your local file-system is ".gnd". The contents of a
directory are URIs and meta data. The URIs contain all the information
gnunet-download to retrieve the file. The meta data
typically includes the mime-type, description, a filename and other meta
information, and possibly even the full original file (if it was small).
Egos and File-Sharing#
When sharing files, it is sometimes desirable to build a reputation as a source for quality information. With egos, publishers can (cryptographically) sign files, thereby demonstrating that various files were published by the same entity. An ego thus allows users to link different publication events, thereby deliberately reducing anonymity to pseudonymity.
Egos used in GNUnet’s file-sharing for such pseudonymous publishing also correspond to the egos used to identify and sign zones in the GNU Name System. However, if the same ego is used for file-sharing and for a GNS zone, this will weaken the privacy assurances provided by the anonymous file-sharing protocol.
Note that an ego is NOT bound to a GNUnet peer. There can be multiple egos for a single user, and users could (theoretically) share the private keys of an ego by copying the respective private keys.
A namespace is a set of files that were signed by the same ego. Today, namespaces are implemented independently of GNS zones, but in the future we plan to merge the two such that a GNS zone can basically contain files using a file-sharing specific record type.
Files (or directories) that have been signed and placed into a namespace can be updated. Updates are identified as authentic if the same secret key was used to sign the update.
Advertisements are used to notify other users about the existence of a
namespace. Advertisements are propagated using the normal keyword
search. When an advertisement is received (in response to a search), the
namespace is added to the list of namespaces available in the
namespace-search dialogs of gnunet-fs-gtk and printed by
gnunet-identity. Whenever a namespace is created, an appropriate
advertisement can be generated. The default keyword for the advertising
of namespaces is "namespace".
The anonymity level determines how hard it should be for an adversary to determine the identity of the publisher or the searcher/downloader. An anonymity level of zero means that anonymity is not required. The default anonymity level of "1" means that anonymous routing is desired, but no particular amount of cover traffic is necessary. A powerful adversary might thus still be able to deduce the origin of the traffic using traffic analysis. Specifying higher anonymity levels increases the amount of cover traffic required.
The specific numeric value (for anonymity levels above 1) is simple: Given an anonymity level L (above 1), each request FS makes on your behalf must be hidden in L-1 equivalent requests of cover traffic (traffic your peer routes for others) in the same time-period. The time-period is twice the average delay by which GNUnet artificially delays traffic.
While higher anonymity levels may offer better privacy, they can also significantly hurt performance.
Depending on the peer’s configuration, GNUnet peers migrate content between peers. Content in this sense are individual blocks of a file, not necessarily entire files. When peers run out of space (due to local publishing operations or due to migration of content from other peers), blocks sometimes need to be discarded. GNUnet first always discards expired blocks (typically, blocks are published with an expiration of about two years in the future; this is another option). If there is still not enough space, GNUnet discards the blocks with the lowest priority. The priority of a block is decided by its popularity (in terms of requests from peers we trust) and, in case of blocks published locally, the base-priority that was specified by the user when the block was published initially.
When peers migrate content to other systems, the replication level of a block is used to decide which blocks need to be migrated most urgently. GNUnet will always push the block with the highest replication level into the network, and then decrement the replication level by one. If all blocks reach replication level zero, the selection is simply random.
gnunet-identity tool can be used to create egos. By default,
gnunet-identity --display simply lists all locally available egos.
--create=NICK option it can also be used to create a new
ego. An ego is the virtual identity of the entity in control of a
namespace or GNS zone. Anyone can create any number of egos. The
provided NICK name automatically corresponds to a GNU Name System domain
name. Thus, henceforth name resolution for any name ending in “.NICK”
will use the NICK’s zone. You should avoid using NICKs that collide with
well-known DNS names.
Currently, the IDENTITY subsystem supports two types of identity keys:
ECDSA and EdDSA. By default, ECDSA identities are creates with ECDSA
keys. In order to create an identity with EdDSA keys, you can use the
-D NICK option egos can be deleted. Once the ego has been
deleted it is impossible to add content to the corresponding namespace
or zone. However, the existing GNS zone data is currently not dropped.
This may change in the future.
Deleting the pseudonym does not make the namespace or any content in it unavailable.
GNUnet (currently) uses four different types of URIs for file-sharing. They all begin with "gnunet://fs/". This section describes the four different URI types in detail.
For FS URIs empty KEYWORDs are not allowed. Quotes are allowed to denote whitespace between words. Keywords must contain a balanced number of double quotes. Doubles quotes can not be used in the actual keywords. This means that the string ‘""foo bar""’ will be turned into two OR-ed keywords ‘foo’ and ‘bar’, not into ‘"foo bar"’.
Encoding of hash values in URIs#
Most URIs include some hash values. Hashes are encoded using base32hex (RFC 2938).
chk-uri .. _Content-Hash-Key-_0028chk_0029:
Content Hash Key (chk)#
A chk-URI is used to (uniquely) identify a file or directory and to allow peers to download the file. Files are stored in GNUnet as a tree of encrypted blocks. The chk-URI thus contains the information to download and decrypt those blocks. A chk-URI has the format "gnunet://fs/chk/KEYHASH.QUERYHASH.SIZE". Here, "SIZE" is the size of the file (which allows a peer to determine the shape of the tree), KEYHASH is the key used to decrypt the file (also the hash of the plaintext of the top block) and QUERYHASH is the query used to request the top-level block (also the hash of the encrypted block).
loc-uri .. _Location-identifiers-_0028loc_0029:
Location identifiers (loc)#
For non-anonymous file-sharing, loc-URIs are used to specify which peer is offering the data (in addition to specifying all of the data from a chk-URI). Location identifiers include a digital signature of the peer to affirm that the peer is truly the origin of the data. The format is "gnunet://fs/loc/KEYHASH.QUERYHASH.SIZE.PEER.SIG.EXPTIME". Here, "PEER" is the public key of the peer (in GNUnet format in base32hex), SIG is the RSA signature (in GNUnet format in base32hex) and EXPTIME specifies when the signature expires (in milliseconds after 1970).
ksk-uri .. _Keyword-queries-_0028ksk_0029:
Keyword queries (ksk)#
A keyword-URI is used to specify that the desired operation is the search using a particular keyword. The format is simply "gnunet://fs/ksk/KEYWORD". Non-ASCII characters can be specified using the typical URI-encoding (using hex values) from HTTP. "+" can be used to specify multiple keywords (which are then logically "OR"-ed in the search, results matching both keywords are given a higher rank): "gnunet://fs/ksk/KEYWORD1+KEYWORD2". ksk-URIs must not begin or end with the plus (‘+’) character. Furthermore they must not contain ‘++’.
sks-uri .. _Namespace-content-_0028sks_0029:
Namespace content (sks)#
Please note that the text in this subsection is outdated and needs to be rewritten for version 0.10! This especially concerns the terminology of Pseudonym/Ego/Identity.
Namespaces are sets of files that have been approved by some (usually pseudonymous) user — typically by that user publishing all of the files together. A file can be in many namespaces. A file is in a namespace if the owner of the ego (aka the namespace’s private key) signs the CHK of the file cryptographically. An SKS-URI is used to search a namespace. The result is a block containing meta data, the CHK and the namespace owner’s signature. The format of a sks-URI is "gnunet://fs/sks/NAMESPACE/IDENTIFIER". Here, "NAMESPACE" is the public key for the namespace. "IDENTIFIER" is a freely chosen keyword (or password!). A commonly used identifier is "root" which by convention refers to some kind of index or other entry point into the namespace.